FAQ

It takes less than five minutes. Flatmate’s external sensors simply screw onto your existing tyre valves—no tools or tyre removal required.

Not at all. The Flatmate system is 100% DIY, saving you the installation fees associated with internal sensor kits.

Flatmate external sensors are incredibly lightweight (under 10 grams) and rarely require wheel re-balancing on standard 4WD or passenger

Flatmate sensors come pre-paired from the factory. You just turn on the display, screw on the caps, and you are ready to drive

Flatmate includes an anti-theft locking nut system that requires a specific wrench to remove, keeping your sensors safe while parked.

It is simple to adjust via the menu buttons on the Flatmate display, allowing you to set custom high and low-pressure thresholds.

Yes, Flatmate is fully portable. You can unscrew them from your daily driver and put them on your weekend 4WD in minutes.

Standard rubber valves work fine, though metal valves are recommended for heavy-duty off-roading with any TPMS, including Flatmate.

No, Flatmate sensors are manufactured with high-quality threads designed to protect your valve stems while providing a perfect airtight seal.